New master cylinders as a result, and I decided it was time to make a really good mirror, one that would function well as a mirror, and also protect the bike (and me) from damage. I had three goals for my design. That it work as well as an OEM mirror for seeing what was going on behind. That it could fold completely out of the way, safe from giving or receiving damage when offroad and. Ideally, it would even have some ability to give in a crash and prevent damage not only to the mirror, but also to the bike.
Many experiments later, the mirror for sale here is the result. The benefits of this system are many, but let me expound on a few. First, because there are two ball joints, you have the ability to position it exactly where you want it, both when extended for viewing, and also when folded away. On most bikes, you can fold it perfectly along the handlebars, out of the way of any conceivable crash, and without blocking the view of the speedometer or GPS. Second, because there is adjustable tension, it is easy to position it and then lock it in place.
The system uses RAM-Mount components, which are well known for their durability and effectiveness. Third, the joints are stiff enough to hold the mirror at triple digit speeds, but will move if they are struck, which protects you from injury and your bike from damage. I'm sure it is possible to break the mirror, but I haven't succeeded yet and I've tried pretty hard, going so far as to race an enduro with the mirror in place. The body is made from 43% glass filled Zytel, which is really tough stuff. Easy to remove the mirror entirely- just loosen the RAM arm, and remove it along with the mirror.
Convex lens- we used SAE spec convex glass that provides a nicer field of view than a flat piece would, while retaining the ability to focus on details. Universal fit- You can easily swap the mirrors between bikes.
Can be positioned further out than a stock mirror, resulting in seeing more of what is behind you and less of your elbow. The product meets each of the goals I started out with, and after thousands of miles of testing, has proven to be exactly what I was looking for all those years! The KTM Mirror Kit contains the following.
2 x Double Take Adventure Mirror. 2 x RAM Arm - 5 1/4 inch. 2 x RAM Ball with M10 x 1.25 pitch (Motorcycle Mirror Perch). 1 x set of 2 adapters.This item is in the category "Vehicle Parts & Accessories\Motorcycle Parts\Other Motorcycle Parts". The seller is "rugged-roads-co-uk" and is located in this country: GB. This item can be shipped worldwide.